Al Aman offers a wide range of Fire Fighting Equipment that are approved by the UAE Civil Defence.
Al Aman Fire pumps are designed & manufactured by highly qualified engineers & skilled labours with the use of most modern equipment to ensure the top quality & maximum performance under desired site conditions. Al Aman has a wide range for their fire pumps. All the pumps are manufactured & Tested under the supervision of highly qualified engineers. Consequently, Al Aman makes sure, you receive the full return for your investment.
UL LISTED FIRE PUMPS
Our UL listed fire pumps offer the range of 50 GPM to 5000 GPM. These pumps are manufactured as per NFPA 20 and UL Approval Standards. We offer the UL listed fire pumps in different types depending on the pump capacities.
Horizontal End-Suction Fire Pumps
Al Aman’s EH Series are manufactured in accordance with NFPA20 standards for firefighting applications. The pump is designed with state-of-art technology and has the finest components for quick maintenance, performance efficiency, and energy conservation. It’s a precision-made pump suitable for electric and diesel drives, designed to withhold temperatures of up to 580°F.
- Pump capacity: 50GPM-750PM
- Properties and performance of NFPA20
- Operational efficiency
- Dynamic balanced impeller
- UL/FM approved
- Customized according to requirements
Horizontal Split-Case Fire Pumps
HSC pumps are designed in accordance with all requirements of the UL standard for safety (UL448). Al Aman horizontal split- case fire pumps are specifically manufactured and tested for fire service applications where the reliability of performance is of vital importance.
Available in a variety of different pressures and flows starting from 1,000gpm, the split case fire pumps can be driven by an electrical motor or diesel engine. The pump provides distinct advantages such as high flow rates, high efficiency, stable operation, low noise, long service life, and is easy to install and maintain.
- Pump capacity: 1000GPM-2000GPM
- Properties and performance of NFPA 20
- Fitted components
- Enclosed impeller design
- Positive suction pressure
- Integral bearing arms
- Mechanical dependability
Vertical Hollow Shaft Motor
Vertical Turbine centrifugal pump is designed according to NFPA20. This pump is used for any underground water source where the water level is below the pump room. With this type of unit, the impellers are fully immersed in the water maintaining prime at all times. The pumps are driven by vertical electric motors or by diesel engines through a right angle gearbox.
- Pump capacity: 50GPM-5000GPM
- Class F Insulation, Class B rise at full load
- Properties and performance of NFPA 20
- 230/460 Volt Motors Suitable for 230 volt part winding start
- 15 service factor
- Energy efficient (IE2)
- Non-reverse Ratchet
- UL/FM certified
- 1480r/min or 1780r/min
- One-year warranty
NON UL LISTED FIRE PUMPS
Our range of Non-UL Fire Pumps caters to 30 gpm to 2000 gpm.
The Non-UL types of pumps include Horizontal End Suction, Horizontal Split case, Horizontal Multistage, Vertical inline, and Vertical Turbine.
The Non-UL Pump sets include fire pumps driven by Electric motor, Diesel engine and Jockey pump. All pumps are inter-connected by suction and delivery piping with all valves, accessories, and along with control panel and pressure tank. The control panels are designed for the automatic & manual operation of the fire pumps.
FIRE PUMP ACCESSORIES
FIRE PUMP CONTROL PANELS
All our control panels are factory assembled, wired, tested as a unit and comply to all requirements of the latest edition of NFPA-20 (Centrifugal Fire Pumps) and NFPA-70 ( National Electrical Code). Controllers are listed by Underwriters Laboratories’ (UL), Inc. and are in compliance with UL 218, Standard for Pump Controllers (CSA), and Standard for Industrial Control Equipment (CUL) and approved by Factory Mutual (FM).
Our three types of control panel:
- Electric Control Panel
- Diesel Control Panel
- Jockey Control Panel
We offer a reliable flow meter that is accurate in calibration with gpm meter and installed at the discharge of a fire pump to accurately determine pump performance.
Brand Name: GERAND – MADE IN USA
Model: K Meter
Range: 50 – 3000 gpm
PRESSURE RELIEF VALVE
An important safety component of a fire protection system is the pressure relief valve which releases excess pressure. We offer a UL Listed product from the reputed and reliable brand ‘WEFLO’.
Brand Name: WEFLO – UL Listed
Working Pressure: 300 PSI
Our fuel tank is a cylindrical construction with storage capacity of up to 550 gallons.